The 2nd Workshop on Electrical and Electronic Engineering 2015 will be held on August 19-22, 2015
at Jeju National University International Center, Jeju Island, Korea

The 2nd Electrical and Electronic Engineering 2015 workshop will be the most comprehensive workshop focused on the various aspects of advances in Electrical and Electronic Engineering. Our workshop provides a chance for academic and industry professionals to discuss recent progress in the area of Electrical and Electronic Engineering.

The goal of this conference is to bring together the researchers from academia and industry as well as practitioners to share ideas, problems and solutions relating to the multifaceted aspects of the Electrical and Electronic Engineering.


Power Generation, Transmission and Distribution
Generation Systems
Protective Relaying
Modelling and Simulation
Load Modelling
Forecasting and Management
Power Quality and Grounding
Maintenance and Operation
Distribution System Planning and Reliability
Flexible AC Transmission Systems
Renewable energy integration

Power Electronics, Systems and Applications
Soft switching converters
Multilevel converters
Matrix converters
Emerging topologies
Power Converters Modelling
Simulation and Control
Power Factor Correctors (PFC)
EMI and over-voltage protection
Active Filters and Harmonics
Power Supplies
Power Electronics Components and Packaging
Reliability and Fault

Smartgrids Technologies & Applications
Smart grid for distributed energy resources
Smart grid for energy savings and financial management
Smart grid in interdependent energy infrastructures
Smart grid for intelligent monitoring and outage management
Smart grid for energy management in buildings and home automation
Phasor measurement unit applications for smart grid
Smart grid for plug-in vehicles and low-carbon transportation alternatives
Smart grid for cyber and physical security systems

Electrical Machines and Adjustable Speed Drives
AC and DC Machines and Drives, Reluctance machines and drives
Permanent magnet machines and drives
Linear machines and drives
Sensorless control
Piezo and electrostatic actuators,
Modelling and simulation
Maintenance and Fault Diagnosis
Electrical Vehicles
EMC related phenomena

Renewable Energy Sources and Technology
Energy Management and Environmental issues
Hybrid Power Systems
Distributed and Co-Generation Systems
Wind Energy Systems
Marine Renewable Energy
Biomass Energy and Geothermal Resources
Solar Energy Systems,
Hydro Power Plants
Hydrogen Systems and Fuel Cell

Materials Science and Engineering
Metallic Alloys
Tool Materials
Superplastic Materials
Ceramics and Glasses
Amorphous Materials
Multifunctional Materials
Smart Materials
Engineering Polymers
Functional materials
Nuclear fuel materials
Sensors and surfaces
Thin Film Chalcogenide Photovoltaic Materials
Nuclear Materials IV
Magnetic Materials
Multi-Functional Magnetic Materials
Superconducting Materials
Structured Materials
Spintronics Materials and Devices
Hard/Soft Magnetic Materials
Crosscutting materials

Control Theory and Applications
Access Control
Robotics and Applications
Sensors and Signal Processing
Intelligent Systems
Biomedical Engineering Systems
Process Control, Monitoring, Design and Optimization, Automation
Industrial Applications Control
Devices and Instruments
Navigation, Guidance and Control
Information and Networking
Manufacturing Systems and Automation
Multimedia Systems


Special Session Proposal: June 10, 2015 (Extended)
Special Session Acceptance: June 15, 2015 (Extended)

Paper Submission for Review: June 30, 2015 (Extended)
Acceptance Result Notification: July 10, 2015
Camera Ready and Registration: July 20, 2015

  [Back to Top]   


All papers should be submitted by e-mail for review (at least 4 pages, max 8 pages). Every submitted paper will be carefully reviewed by at least three members of the International Program Committee.

Important Notice:

Just focus on and express your research contributions to reduce the time for review process. Do not exceed to 8 pages in LNCS paper format.

Please download paper format by clicking here.

Please visit and submit your paper: Here!


Only 50 high quality papers will be accepted, and will be published by SCOPUS or EI indexed journals.

1. Conference Proceedings:
All papers accepted and registered will be included in conference proceedings, ASTL series, and will be sent to EI.

2. Journal Publish:

Selected high quality papers will be included in one of international journals indexed in SCOPUS after revision and extension.

In the acceptance letter, target journal will be noticed together.


Call For Special Session

Several special sessions will be held in conjunction with our workshop with the aim to explore special topics and provide international forums for scientists, engineers, and experts to exchange and share their experiences, new ideas, and research results on hot topics.

Papers accepted and registered will be included in ASTL conference proceedings published by SERSC and selected papers will be included in one of international journals after revision and extension. (Please visit Proceedings Page).
The special session proposal should include following information:

1. Title of the special session: Special Session on ...
2. Special Session chair (s): name, affiliation, address, phone and fax numbers and e-mail.
3. Brief description of the Special Session (several hundred words)
4. Expected number of papers to be submitted
5. Call for paper of Special Session (draft version)
6. Tentative list of program committee members (Name, affiliation, country, and email address)

Each Special Session will start to distribute a call for paper after receiving the notification. Papers submitted to each Special Session will be reviewed by the Special Session committee.

Session Session Proposal

Please send your Special Session Proposal to Special Session Management Chair, E-mail:

Each special session chair can decide his/her own paper submission due.

But special session chairs should submit accepted paper list to Session Management Chair before 'Acceptance Notification' date in 'IMPORTANT DATES' part.


All attendees must make the registration. At least one author per paper must be accompanied by one Mandatory Registration. Without a dedicated registration, the paper cannot be included in the Proceedings / Journals.

We recommend credit card registration:

Online Registration Site: Click Here!


General Co-chairs

International Editorial Committee
Abu Bakar Mhd Ghazali, Universiti Tenaga Nasional, Malaysia
Achille De Schepper, Director-DES Consulting, Belgium
Ali KAHRAMAN, Selcuk University Technology Faculty, TURKEY
Ali Khaki Sedigh, K.N. Toosi University of Technology, Iran
Andrey V. Brazhnikov, Siberian Federal University, Krasnoyarsk, Russia
Bangwon Seo, Kongju National University, Korea
Barry Lennox, The University of Manchester, UK
Bimal K. Bose, University of Tenessee USA
Bonheun KOO, Changwon National University, Korea
Boon-Chong Ang, eASIC, Malaysia
Byeong Woo Kim, University of Ulsan, Korea
Byeong-Kwon Ju , Korea University, Korea
Byoung-Suhk Kim, Chonbuk National University, Korea
Byun Gi Sig, Pukyong National University, Korea
Byungcheul KIM, Gyeongnam National University of Science and Technology, Korea
ByungHoon Jeon, Dongguk University, Korea
Byun-Gon Kim, Kunsan national university, Korea
Chang Soo Ryu, Yewon Arts University, Korea
Chang-Wook Han, Dong-Eui University, Korea
Chan-Yong Jin, Wonkwang University, Korea
Cheol-Hee Moon, Hoseo University, Korea
Choi DongOun, Wonkwnag Unversity, Korea
Chun-Yi Su, Concordia University, Montreal, Canada
Dae Hyun Ryu, Hansei University, Korea
Dae-Ki Kang, Dongseo University, Korea
Denis Gillet, EPFL, Switzerland
Dong Sik Bae, Changwon National University, Korea
Dongdong Li, Shanghai University of Electric Power, China
Doo Heon Song, Yongin Songdam University, Korea
Duc T. Pham, University of Birmingham, UK
E.George Dharma Prakash Raj, Bharathidasan University, India
Ezendu Ariwa, London Metropolitan University, UK
Guntae Kim, Ulsan National Institute of Science and Technology, Korea
Han-Yong Jeon, Inha University, Korea
Heejong Suh, Chonnam National University, Korea
Ho-Young Jung, Chonnam National University, Korea
Hyekyoung Kim, Yeungnam University, Korea
Hyeop-Goo Yeo, Hanshin University, Korea
Hyuk-Kee Sung, Hongik University, Korea
Hyun Cheol Cho, Ulsan College, Korea
Hyun-Chang Lee, Wonkwang University, Korea
ING. Natasa Zivic, University of Siegen, Germany
Ismail (Yusuf), Lamintang Education and Training (LET) Centre, Indonesia
Jaekook Kim, Chonnam National University, Korea
Jianmin Chen, Fudan University, China
Jin Keun Hong, Baekseok University, Korea
Jong-Chan Lee, Kunsan National University, Korea
Joon-Ho Choi, Chonnam National University, Korea
Jung Hyun Kim, Hanbat National University, Korea
Jung Tae, Kim, Mokwon University, Korea
Jus Kocijan, Jožef Stefan Institute, Slovenia
Ki-Chan Kim, Hanbat National University, Korea
Kim Gwan-Hyung, Tong-Myong University, Korea
Kwangki Ryoo, Hanbat National University, Korea
M. Vopson, UniversItalyy of Portsmouth, UK
Mahdi Moharrampour, Islamic Azad University, Buin zahra Branch, Iran
Mohammed Ali Hussain, KL University, India
Namasivayam Vasudevan, Anna University, India
NERI F., University of Piemonte Orientale, Italy
Nikos A. Aspragathos, University of Patras, Greece
Omar Badran, Al-Balqa` Applied University, Jordan
P. Sanjeevikumar, VIT University, India
Park Han Seok, Pukyong National University, Korea
Pierre Borne, Ecole Centrale de Lille, France
Razamin Ramli, Universiti Utara, Malaysia
Sabu Thomas, Mahatma Gandhi University, India
Sang Gug Park, Iiduk University, Korea
Sattar B. Sadkhan, University of Babylon, Iraq
Sattar J Aboud, Anglia Ruskin University, UK
Seong Cheol Kim, Sangmyoung University, Korea
Seong-Yoon Shin, Kunsan National University, Korea
Shin Dong Suk, Tong-Myong University, Korea
Shin-Hyeoung Choi, Kwangwon National University, Korea
Shucheng Yu, University of Arkansas, USA
Soo Kyun Kim, Pai Chai Unversity, Korea
Soo Yeol Lee, Chungnam National University, Korea
Soo Young Kim, Chung-Ang University, Korea
Soon-Gil Yoon, Chungnam National University, Korea
Suk Tai Chang, Chung-Ang University, Korea
Sungmin Jung, Hanshin University, Korea
Sungyeol Kwon, Pukyung National University, Korea
Sun-Yeob Kim, Namseoul University, Korea
Teuk Seob Song, Baekseok University, Korea
WanBok Lee, Kongju National University, Korea
Yongtae Kim, KIST, Korea
YooTaek Kim , Kyonggi University, Korea
Youngman Kim, Chonnam National University, Korea
Z. A. Vale, ISEP - Instituto Superior de Engenharia do Porto, Portugal
Zeeshan Ahmed, University of Wuerzburg, Germany


Please visit to find accommodation and tour program.


If you have any question about the CfP and papers submission,
please email to Secretary at manager[@]

  [Back to Top]